Specifications

rated voltage: 12kV/24kV/40.5kV 
rated current: 630A, 
AC 50/60Hz; 
SF6 gas insulation 

Summary
PGS-12/24/40.5 outdoor SF6 insulation load break switch is suitable to the distribution net of rated voltage 12/24/40.5kV, rated current 630A, AC 50/60Hz to open and close the load current and short circuit current in the power system. It can automatically disconnect the distribution line segment in which the fault occurred. Equipped with the advanced
electronic controller, the switch can be for manual operation, electric operation and remote operation. The electronic controller is installed in a stainless steel cabinet, so it can be used in all kinds of climatic conditions. The wire and wireless modems can be also installed in the cabinet to realize remote monitoring and control. Simple, convenient and
quick pole mounting can lower the installation cost
 

Ambient condition

1.Altitude: ≤ 3000m;
2.Ambient temperature: -40°C ~+50°C ;
3.Relative humidity: 100%;
4.Wind pressure: ≤ 700pa (equivalent to wind speed 34m/s);
5.Earthquake intensity: ≤ 8 grade;
6.Pollution degree: Ⅲ
7.Application occasions: no fire and explosion danger, no chemical
corrosion and no frequent severe vibration.
 

Product feature
1. SF6 gas insulation;
2. SF6 is non-toxic, non-combustible and electrical insulation gas;
3. Besides the standard porcelain bushing, a variety of options are available including silicon rubber insulator on the epoxy equipment bushing;
4. Visible Open/Close
The main contact position indicator marked by colors (Green-Open; Red- Close) can be easily visible from the ground. The indicator is connected directly to the main contact drive shaft assembly to ensure displaying the
contact state accurately;
5. Quick operation
Using a spring-powered operator to ensure rapidly closing and opening operation;
6. Remote controllable
Equipped with the electronic controller, field operation or main control platform operation through FTU-interface can be realized;
7. Sturdy and durable switch
The switch is made from the sturdy, durable and anti-corrosion materials (304L stainless steel plate for warships) to ensure long service life and a series of operations;
8. Easily installation
The switch can be pole mounted easily ;
9. Standards
Each switch is filled with SF6 gas and sealed well before delivery, and is strictly tested according to the standards IEC60265-1(1998) and GB3804- 1990.

pepe.eleAToutlook.com